CHILLERS & HEATERS
Seachem Tidal Power Filters
Designed to deliver the highest water quality possible with maximum versatility and ease of use
Tidal™ Power Filters are designed from the ground up to provide your aquarium with high-quality, comprehensive filtration. They are easy to use and adaptable to a variety of aquarium conditions. With a host of features including a self-priming pump, dual water intake with surface skimmer, adjustable flow, maintenance monitor, self-cleaning impeller, and a filter basket that holds any kind of filtration media – and more of it – Tidal™ Power Filters are designed to deliver the highest water quality possible with maximum versatility and ease of use.
Tidal™ Power Filters
Fully adjustable flow regulation
Fully adjustable flow regulation adjusts performance to a specific aquarium volume, type, or provide an environment for fish which prefer more or less water movement or oxygenation. Adjust using the dial on the front, for a powerful full flow rate of 450 gallons per hour on the Tidal 110 down to a gentle 90 gallons per hour on the same filter.
Surface skimmer
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
Adjustable intake flow
With Tidal’s dual intake, it pulls water in through the telescoping pipe below the surface and at the surface through the surface skimmer. Easily adjust how much flow comes from the underwater intake pipe versus the surface skimmer with the intake flow dial.
Heater holder
A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium
Maintenance alert
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
No mess maintenance
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump
The self-priming pump means there’s no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter. This also means that after a power outage, the filter will automatically restart itself.
Product Manuals
https://www.seachem.com/downloads/instructions/Tidal-Filter-Instructions.pdf
Technical Specifications
Tidal 35
Aquarium Size
Up to 35 US gallons (130 Liters)
Flow Rate
130 US GPH (500 L/H)
Watts
6 – (120 v – 60 Hz)
5 – (230 v – 50 Hz)
Filter Volume
0.2 US gallons (0.7 Liters)
Tidal 55
Aquarium Size
Up to 55 US gallons (200 Liters)
Flow Rate
250 US GPH (1000 L/H)
Watts
6 – (120 v – 60 Hz)
5 – (230 v – 50 Hz)
Filter Volume
0.32 US gallons (1.2 Liters)
Tidal 75
Aquarium Size
Up to 75 US gallons (300 Liters)
Flow Rate
350 US GPH (1500 L/H)
Watts
8 – (120 v – 60 Hz)
7 – (230 v – 50 Hz)
Filter Volume
0.50 US gallons (1.9 Liters)
Tidal 110
Aquarium Size
Up to 110 US gallons (400 Liters)
Flow Rate
450 US GPH (2000 L/H)
Watts
12 – (120 v – 60 Hz)
10 – (230 v – 50 Hz)
Filter Volume
0.85 US gallons (3.2 Liters)
Dimensions
Tidal 35
Unit
Length: 6 ⅛ in (15.5 cm)
Width: 5 ⅛ in (13 cm)
Height: 7 ⅛ in (18 cm)
Media Chamber
Length: 5 ⅜ in (13.8 cm)
Width: 2 in (5.2 cm)
Height: 4 ⅞ in (12.5 cm)
Wall Clearance
2 ¾ in (7 cm)
Tank Trim Clearance
1 in (2.6 cm)
Internal Tank Clearance
1 ⅜ in (3.5 cm)
Tidal 55
Unit
Length: 8 1⁄16 in (20.5 cm)
Width: 6 ⅛ in (15.5 cm)
Height: 8 ⅜ in (21.4 cm)
Media Chamber
Length: 7 ⅜ in (18.9 cm)
Width: 2 9⁄16 in (6.6 cm)
Height: 5 ⅞ in (15 cm)
Wall Clearance
3 in (7.5 cm)
Tank Trim Clearance
1 in (2.6 cm)
Internal Tank Clearance
1 11⁄16 in (4.3 cm)
Tidal 75
Unit
Length: 9 ⅜ in (23.4 cm)
Width: 7 in (17.8 cm)
Height: 9 ½ in (24.2 cm)
Media Chamber
Length: 9 ⅜ in (23.9 cm)
Width: 3 in (7.6 cm)
Height: 7 in (18 cm)
Wall Clearance
3 ½ in (8.5 cm)
Tank Trim Clearance
1 5⁄16 (3.3 cm)
Internal Tank Clearance
1 ¾ in (4.3 cm)
Tidal 110
Unit
Length: 11 ⅝ in (29.5 cm)
Width: 7 ⅝ in (19.2 cm)
Height: 9 ½ in (24.2 cm)
Media Chamber
Length: 11 in (27.9 cm)
Width: 3 ½ in (8.9 cm)
Height: 7 ⅞ in (20 cm)
Wall Clearance
4 in (9.5 cm)
Tank Trim Clearance
1 ⅜ in (3.5 cm)
Internal Tank Clearance
2 in (5 cm)
Features at a Glance
Tidal 35
- Reversible filter cover
- Maintenance alert device
- Overflow prevention
- Large-capacity filter basket
- Aerating return flow
- Flow regulation
- Surface skimmer
- Sub-surface intake
- Leveling dial
- Self-priming pump
- Self-cleaning impeller
Tidal 55
- Reversible filter cover
- Maintenance alert device
- Overflow prevention
- Large-capacity filter basket
- Aerating return flow
- Flow regulation
- Intake flow regulation
- Surface skimmer
- Sub-surface intake
- Telescoping intake pipe
- Leveling dial
- Self-priming pump
- Self-cleaning impeller
- Heater holder
Tidal 75
- Reversible filter cover
- Maintenance alert device
- Overflow prevention
- Large-capacity filter basket
- Aerating return flow
- Flow regulation
- Intake flow regulation
- Surface skimmer
- Sub-surface intake
- Telescoping intake pipe
- Leveling dial
- Self-priming pump
- Self-cleaning impeller
- Heater holder
Tidal 110
- Reversible filter cover
- Maintenance alert device
- Overflow prevention
- Large-capacity filter basket
- Aerating return flow
- Flow regulation
- Intake flow regulation
- Surface skimmer
- Sub-surface intake
- Telescoping intake pipe
- Leveling dial
- Self-priming pump
- Self-cleaning impeller
- Heater holder
Ventilation slots
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
Bottom-to-top flow
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Telescoping intake pipe
The adjustable telescoping intake on the Tidal 55/75/110 units allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts.
No Filter Cartridges
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem’s Matrix™ bio-media to get you started.
Self-cleaning impeller
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
Adjustable leveling device
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles.
3 year warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts. Warranty Registration Link http://registration.seachem.com/
Best hob in the market